Within the scope of our own production portfolio we are able to offer production of tinsmith elements and bending of plates to our customers. For this production we use varnished and galvanized steel plates or plates without surface finishing. We buy the plates in coils or in sheets.

Production of tinsmith elements

We produce tinsmith elements mainly from galvanized double-side varnished plates with protective foil while the most common thickness of the processed plates is 0,63 mm and 0,75 mm. Tinsmith elements are also produced from galvanized plates.

The material preparation stage of tinsmith elements production includes upcoiling of plate coils on semi-automatic line used for plate straightening, application of the protective foil on the plate, slitting and cross-cutting of the plate. The maximum weight of a single coil is 3 500 kg, plate width is 1 250 mm.

The above mentioned CNC lines are used for processing of tinsmith plates into various shapes required by the customer. The color of the tinsmith elements can be selected according to RAL samples. Standard colors of varnished plates are available from our warehouse.

SPECIFICATION OF MECHANICAL EQUIPMENT

CNC SEMI-AUTOMATIC BENDING LINE WECKENMANN KS 682 SA
Maximum length of the tinsmith element 6000 mm
The range of processed plate thicknesses 0,6 mm–2 mm
CNC SEMI AUTOMATIC BENDING LINE LINKA ZAKO
Maximum length of the tinsmith element 6000 mm
The range of processed plate thicknesses 0,6 mm–2 mm

Note: for plate thickness above 1,5 mm the maximum length of the tinsmith element is 3000 mm.

Bending of steel plates

We offer bending of steel plates on electromechanical bending line. The above mentioned equipment is used for bending of steel plates without surface finishing. Specific shapes of bending need to be discussed with the responsible representative of our company.

SPECIFICATION OF THE MECHANICAL EQUIPMENT

ELECTROMECHANICAL BENDING LINE OZAMECH KM-8/3000
Maximum length of the bent element 3000 mm
The range of bent plate thicknesses 1,5 mm–6 mm

Contact person

Jiří Sáblík

Head of production
Mobile: + 420 605 202 451

jiri.sablik@femont.cz

You can send your inquiries and job orders electronically to the contact person mentioned above.

If required by the customer, we are also able to ensure transport of the delivery.

Besides production of tinsmith elements and bending of steel plates we also offer